How much does it cost to get a jet ski winterized? - how much does it cost to winterize a jet ski
Normally, what is the cost of the winter jet skis?
Wednesday, February 17, 2010
How Much Does It Cost To Winterize A Jet Ski How Much Does It Cost To Get A Jet Ski Winterized?
2 comments:
What list? LMAO
Do it yourself. If you have a carburetor - buy spray Stable add to the dealership that the types of aerosols will feed them.
Trailer of tilt, as she leans back and hood.
Most of these things in a different uy on the list should be reviewed at regular intervals throughout the year.
Oh, if you keep the ski in a heated garage in winter, is not required.
We charge $ 139. If you are in an area where you need to have drained the water and pull the freeze plugs?
Outside
1. Remove the engine and the fuselage all stains, dirt and debris washing.
2. Cover the pot and the engine painted surfaces with a new layer of wax.
3. Cover with a ship of high quality, breathable cover.
4. Remove the screw and check thoroughly for damage. (It is now time to replace a service or damaged a propeller, not the beginning of next season.)
5. Clean the drive shaft and applying a protective layer of fat.
6. If the boat in the water, install a device to melt.
Inside
7. Install a dehumidifier in the cabins and enclosed areas to prevent mold growth.
8. Make sure you keep clean and dry.
9. Remove note the bilge drain plug and you know where they have established. Consider cap on the wheel or other conspicuous place with a piece of rope, so you do not forget to install the spring.
Electric
10. Check and repair all electrical cables and connections. Make sure nothing was damaged in the use of the season.
11. Remove the batteries from the boat and in a cool, dry place. Insert the batteries in a smart charger or charge them approximately once a month.
Motor
12. Change the crankcase and the gearbox when the engine is hot and the engine is running according to the distribution of fresh oil in the center.
13. Change oil filter.
14. Rinse GearWater and sewerage.
15. Circulate antifreeze through the engine block and manifolds.
16. Steam separator drain the tank through a vent screw (Fuel Injected engine).
17. The outer carburetor, drain the float bowls of the carburetor.
18. Change the transmission fluid (inside).
19. Fog the engine by spraying fogging fluid into each of the carburetor throat and throttle bodies.
20. Remove the hoses from the pump raw water.
21. Replace spark plugs and spray of liquid into the ports of the candle.
22. Be sure to complete lubrication service on boat and motor.
23. Fat on all external engine accessories.
24. Application of corrosion protection film outer parts of the engine.
25. Check the engine ofOOSE ties, broken or missing. Tighten the screws and make necessary repairs.
Fuel Systems
26. Fill the tank with the fuel will be permanently installed to avoid condensation.
27. Add desired amount of fuel tanks, fuel stabilizer.
28. You portable fuel tanks for the safe removal and be well ventilated. Leaking containers and plastic high-Off Metal Tank. Drain the fuel lines attached.
Boat Trailer
29. Put the trailer on stands or blocks so the wheels are supported on the ground. Lift the upper arch of the back, thus facilitating the diversion of water from rain or snow.
30. Clean wheels of the trailer to remove and rebuild the wheel bearings.
Post a Comment